FITS SHI HT2 SPINDLE

 Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation Low-friction dual seals protect the bearings from harmful contaminants Sealed premium bearings are both serviceable and replaceable Designed for installing Shimano HTII 24mm or SRAM GXP 22/24mm spindle cranks into PF30 frames without the need for adapters Origin8...

 Converts non-threaded 46mm press-fit BB shells to accept most 24mm or 24/22mm spindle cranks For installation into PF30 frames without the need for adapters Enduro ABEC 3 sealed bearings Dual silicone seal keeps the contamination out 68/73mm PF30 Shimano HTII 24mm Alloy 153g Black

 Converts non-threaded 46mm press-fit BB shells to accept most 24mm (Shimano type) spindle cranks without the need for adapters Enduro ABEC 5 Angular Contact sealed bearing in drive side cup Enduro ABEC 3 sealed bearing in non-drive side cup Dual silicone seal keeps the contamination out 68/73mm PF30 Shimano HTII 24mm Alloy 153g Black

 Specifically designed for installing 24mm spindle diameter cranks (Shimano, Etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters Two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance Enduro ABEC-3 bearings Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB...