BOTTOM BRACKETS

 Threaded BB for 386EVO frames and 22/24mm diameter spindle cranks Machined cups thread together for stability, increased bearing life, and simple installation and maintenance Enduro Angular Contact bearings **Please Note: will not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2). If your Quarq spider has an ID less than 49.5mm, your crank may rub on the BB cup Compatible with Quarq DZero powermeter spiders...

 Threaded BB for 386EVO frames and 24mm diameter spindle cranks Machined cups thread together for stability, increased bearing life, and simple installation and maintenance Enduro Angular Contact bearings 86.5mm 386EVO Shimano HTII 24mm Alloy 133g Black

 Shims down a 386EVO bearing 86.5mm 386EVO Sram GXP 24/22mm Alloy

 Shims down a 386EVO bearing 86.5mm 386EVO Shimano HTII 24mm Alloy

 Thread together BB for 386EVO and BBRIGHT frames and 30mm spindle diameter cranks Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance Enduro Angular Contact bearings 86.5mm 386EVO 30mm Black

 Black anodized machined aluminum cups Enduro ABEC 3 sealed bearings Dual silicone seal keeps the contamination out 86/92mm BB86 Shimano HTII 24mm Alloy Black

 Used to adjust crank chainline or take up any slack when using 30mm, 24mm (Shimano, FSA, etc.) or 24/22mm (SRAM/TruVativ) Spindle Cranks in any BB30/PF30/BB86/92 or similar crank system 10 spacers per bag Machined engineering-grade Delrin 24mm x 0.5mm

 Used to adjust crank chainline or take up any slack when using 30mm, 24mm (Shimano, FSA, etc.) or 24/22mm (SRAM/TruVativ) Spindle Cranks in any BB30/PF30/BB86/92 or similar crank system 10 spacers per bag Machined engineering-grade Delrin 24mm x 1.0mm

 BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips Direct replacement bearing for OEM BB30 and BB30A systems Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm 68/73mm BB30 BB30 Black

 Direct replacement bearing for BB30 OEM systems ABEC-3 sealed bearings 68/73mm BB30 BB30 TBD

 Designed for installing 24mm or 24/22mm spindle cranks into BB30 frames without the need for any adapters. Enduro ABEC 3 sealed bearings Dual silicone seal keeps the contamination out 68/73mm BB30 Shimano HTII 24mm Alloy 153g Black

 Converts BB30 shells to accept most 24mm or 24/22mm spindle cranks without the need for adapters Enduro ABEC 5 angular contact sealed bearings Dual silicone seal keeps the contamination out 68/73mm BB30 Shimano HTII 24mm Alloy 153g Black