Motor Kit Rear Direct Drive
Skip to main content

Motor Kit Rear Direct Drive

Item #: EBKRDD
Price: $688.00
    The product is in stock Availability: In Stock
    Usually ships In 1-2 Business Days
    Speeds:

    Wheel Size:


    Update price
    Quantity:

    About This Item

    • Best for Heavy Riders & Cargo
    • Pedal-Assist & Throttle On Demand
    • Programmable LCD Dashboard
    • 500 - 1000 Watts

    Direct-Drive Hub Motor Conversion Kit w/ Pedal-Assist and Throttle On Demand functions. New programmable LCD!

    This electric bike conversion kit without battery pack, is for riders that want the simplicity and reliability of the 500w direct-drive hub motor and the option of supplying their own 36 volt or 48 volt battery pack. Direct-drive motors are strong, durable and long-lasting due to zero internal friction.

    Who's it for? This kit is ideal for heavier applications with total loads (rider and gear) over 250lbs.

    Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese, Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND the battery is capable of 22Amp continuous discharge. The Amp Hour (AH) battery specification is an indication of a battery's capacity. A battery capacity of 10ah will typically deliver 20 miles / 32kms range.

    The E-BikeKit™ is designed for convenience, performance, and reliability.
    With an LCD dashboard control panel and 36v/48v 12FET controller, the system is easy to install and even easier to use. All E-BikeKit system components are compatible with both 36 volt and 48 volt battery packs. The controller and LCD are also compatible with all motor types offered by E-BikeKit.


    Conversion Kit Specs:
    Watts (Nominal/Peak): 500-1000w (EBK 22amp controller)
    Top Speed: Approx. 14 MPH @36v in 26" wheel / Approx. 20 MPH @48v in 26" wheel
    Range: Depends on battery capacity(AH), total load, rider input and terrain
    Performance: Medium
    Efficiency: Low
    Stealth Factor: Low

    Battery: Not Included
    Charger: Not Included

    Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese, Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND the battery is capable of 22Amp continuous discharge. The Amp Hour (AH) battery specification is an indication of a battery's capacity. A battery capacity of 10ah will typically deliver 20 miles / 32kms range.


    Choosing Your Wheel Size: You can find your wheel size written on your tire. Available size options for this conversion kit are: 16", 20", 24", 26", 700c & 29er. Acceptable tire widths for the E-BikeKit rims: 1.15"(29mm) - 2.25"(57mm).

    comes with all of the parts you'll need for your conversion.

    1 x USA hand-built wheel w/ disc-brake compatible hub motor
    1 x 36/48V compatible 22amp 12FET controller
    1 x Programmable LCD Dashboard
    1 x PAS 12-magnet Split Disc
    1 x PAS Sensor Left side mount (right by request)
    2 x Throttles (1 Thumb & 1 Split-Twist)
    2 x E-Brake handles (left & right)
    1 x Motor cable
    1 x Accessory cable
    1 x Battery wire harness (kits w/o batteries only)
    1 x 7-Speed Shimano Freewheel (rears only)
    1 x Owner's manual w/ installation guide
    ***Zip Ties, c-washers & torque arms in every kit!