Replacement Parts
!
e bike kit

Charger 36V 2 Amp Lead Acid Ebike Kit

36v 2Amp Sealed Lead Acid Battery Charger - NEW Premium "HighPower" Brand

Automatic protection for your battery against over charging and short circuits.

Features:

  • -UL Listed & CE Approved
  • -Charges SLA batteries at a rate of 2amps per hour (ie. 9ah pack = 4.5hrs 0-100%)
  • -Lights indicating "On", "Charging" and "Full".
e bike kit

Charger 48V 2 Amp Lead Acid EbikeKit

48v 2Amp Sealed Lead Acid Battery Charger - NEW Premium "HighPower" Brand

Automatic protection for your battery against over charging and short circuits.

Features:

  • -UL Listed & CE Approved
  • -Charges SLA batteries at a rate of 2amps per hour (ie. 9ah pack = 4.5hrs 0-100%)
  • -Lights indicating "On", "Charging" and "Full".
e bike kit

E-Bike Lead Acid Battery Wiring Pack

E-BikeKit™ Lead Acid Battery Wiring Pack

Makes wiring a Lead Acid battery pack fast and easy. Save money on shipping by buying your deep cycle lead acid batteries locally. Use our wiring pack to quickly and conveniently wire your 12 volt batteries in a series to make a 36 volt or 48 volt e-bike battery pack.

Includes:

1 x Battery Wiring Harness w/ Anderson Powerpole connectors
1 x Loop Wire w/ Fuse Box and 30Amp Fuse
2 x Jumper Wires (extra wire for wiring 48V packs)

e bike kit

Universal Torque Arm

E-BikeKit Stainless Steel Universal Torque Arm

Stainless steel torque arm for both 14mm and 12mm axles.

Based on design from The Renaissance Bicycle Company, www.ebikes.ca.

 Includes:

1 x stainless steel bolt & lock nut with nylon insert

1 x hose clamp

e bike kit

Controller for E-Bike Kit

Electric Bike-22A Brushless Controler


Electric Bike Controller - 22amp/12FET - Latest Model. Brushless e-bike motor controller. 36 volt and 48v compatible up to 22amps.

Included with E-Bikekit systems purchased after May 2013.

Controller E-Bike Kit 20 Amp Brushless

Electric Bike-20A Brushless Controler

Electric Bike Controller - 22amp/12FET - Latest Model. Brushless e-bike motor controller. 36 volt and 48v compatible up to 22amps.

Included with E-Bikekit systems purchased after May 2013.

e bike kit

Electric Bike Thumb Throttle TRS EBike Kit

E-BikeKit Thumb Throttle

This Electric Bike thumb throttle is easy to use and great for those that want to keep thier original handlebar grip. Typically the thumb throttle is used on bikes that have a twist gear changing system. That said it comes down to personal choice as the thumb throttle can also be used on a bike that has a thumb gear changing system.

 *Hall Type, 5 volt

The split-twist throttle is the most popular throttle type, next is the thumb and then the full twist.

*Includes an allen wrench for securing the throttle to the handlebars.

e bike kit

Electric Bike Split-Twist Throttle TRS

E-BikeKit Twist Throttle

This Electric Bike twist throttle is similar to a motorcycle throttle but a lot easier to twist (it won't hurt your hand it you are using for an extended period). Typically the twist throttle is used on bikes that have a thumb gear changing system. That said it comes down to personal choice as the twist throttle can also be used on a bike that has a twist gear changing system. The reality is you would have to reach over the throttle end to change twist gears. But on an electric bike you may find you do not change gears as often and most times can remain in a higher gear using the motor more often to accelerate.

 *Hall Type, 5 volt

The split-twist throttle is the most popular throttle type, next is the thumb and then the full twist.

*Includes an allen wrench for securing the throttle to the handlebars.

30 Amp Permanently Bonded Red/Black Anderson Powerpole Quick Set

30 Amp Permanently Bonded Red/Black Anderson Powerpole Quick Set

Recommended for use with 12-14 gauge wire. Ultrasonically welded sets save assembly time, guarantee correct configuration, eliminate the need for a roll pin and enable the use of Powerpole accessories such as retaining clips.

What is a Powerpole "Quick Set"?

Anderson Power Products Powerpole connectors are available bagged in popular sized sets with volume pricing. A "Quick Set" includes all the parts needed for a two connectors. For the 15, 30 & 45 amp Powerpoles; a set includes (2) red/black bonded housings, (4) contacts and (2) plastic housing covers.

Powerpoles are both genderless and polarized connectors

Powerpoles are genderless, meaning the supply and load connectors are the same. Since there are no male or female parts, all Powerpoles mate with themselves. Powerpoles become polarized when the red and black housings slide together via molded-in dovetails on the housings. Connections can be quickly made and remade sightlessly or in the dark.

e bike kit

Battery Cable W/Anderson 3 foot

Battery Cable w/ Andersons - 3 Foot

 12 Gauge 90 cm (3 foot) Battery Cable w/ Andersons and black shrink.